Hobart 210 MVP Review – Awesome MIG Welder

I love DIY tasks. So, I perform different tasks of my home by myself. A few days ago, I faced a task which needs the use of a welder. As I had faced such tasks before but haven’t bought a welder yet, I decided to buy a welder.
I searched online for a welder that can meet my demands. After some research, I chose to buy Hobart Handler 210 MVP MIG welder. The experience of using this was really great. Now I am writing this Hobart 210 MVP review to let you know about this welder.

Hobart 210 MVP Review

Things to Consider while Buying a MIG Welder

When you make a buying choice about MIG welder, there are some things on which you have to keep your eyes. Knowing about those will help you to make a decision quickly about Hobart Handler 210 MVP MIG welder. So, let’s take a look at those first.

Operating Voltage:

Operating voltage is the first thing you need to consider before choosing a MIG welder. It shows which outlet can take the load of it.

If the welder is marked 110V, you can use your normal home outlets to run the machine. But the limitation of this type of welders is the production of low amperage.

You can go for 220V welders for high ampere. But before that, you need to make sure that you have the 220V power sources in your home. If you don’t have one, you need to install one.

Duty Cycle:

Duty cycle is an important factor you need to keep in mind when you’ll buy a MIG welder. ” Duty cycle ” means the continuous performance of a welder at given output without overheating.

Normally the duty cycle is measured depending on a 10-minute cycle. If you see that the duty cycle of a MIG welder is 30% at 180A/240V, it means the welder can run continuously for 3 minutes without overheating. After that, the welder takes the rest of the 10-minute cycle, or 7 minutes, to be prepared for next operation.

Thermal Overload Protection:

Thermal overload is very common in welding operations as welders allow you only a few minutes of continuous work. After that, it takes time to be cool and prepared for next operation. As a result, if you continue works more than the recommended period, overheating happens.

Overheating may fully damage your welder. So, when you are going to buy the best MIG welder for you, make sure that it comes with superior overheating protection. Otherwise, you may have to suffer later.

These are the common things you need to consider. Besides, you can also check the weight, noise, size, material, brand, etc. for getting a better option.

Hobart 210 MVP Review Everything You Need to Know

Hobart Handler 210 MVP MIG wilder is a great looking and compact MIG welder coming from Hobart. When you’ll unpack it, you’ll be amazed by its simple color combination of black and white.

The welder is made of strong and durable materials. As a result, you’ll find the welder sturdy and perfect for long use.

It comes with some great features that’ll make you able to perform your welding operations comfortably. This is a welder which ensures power, performance, and quality. It also ensures versatility. So, you’ll get the experience of using a machine that is probably the best in its budget range.

It is around 80 lbs. in weight. This means it seems to be a bit heavier than most of the welders available of its size. But the performance can easily beat this drawback.

Features and Benefits

Dual Voltage

Hobart Handler 210 comes with the scope of using it with multiple voltage inputs. You can plug it into 115V or 230V power source to supply power to the welder. Thus, you’ll be able to use an alternative source where you’ll not get the expected voltage.

For example, if you don’t have a 230V source at your home, you can use the 115V home power source to provide power to the welder.

The main advantage of 115V is it is available in almost every place. But the drawback is it can’t produce high amperage. The 230V source can produce huge amperage, but you need to install one to use. Commonly you won’t get 230V source available everywhere.

Hobart Handler 210 allows you to continue your job anywhere by switching between these two voltage sources. Switching is not a tough task. It comes with both 115V and 230V receptacles. All you need to do is add the correct receptacle with the power cord and plug it into the power source. You can switch between the receptacles without the need of any tool.

It allows 7 voltage settings at 230V and 4 voltage settings at 115V. So, you can perform précised welding task without any problem.

Power Output

Being powered by 115V and 230V power sources, Hobart Handler 210 is able to produce different level of amperage according to your need. If you connect it to a 115V power source, you’ll get the output from 25 to 140 amperage. On the other hand, if you connect it to 230V power source, it’ll produce 25 to 210 amperage output.

So, you can see that you’ll get output amperage of different levels, starting from 25 amps to 210 amps. This’ll make you able to use this welder for different tasks until your need exceeds 210 amp.

Duty Cycle

Depending on the power source you have plugged it in, Hobart Handler 210 shows two different duty cycles.

When you’ll connect it with a 115V power source, you’ll get 20% duty cycle at 90 amp output. This is not a bad duty cycle for home use. You can use it continuously for at least 2 minutes. You can perform good tasks within 2 minutes.

On the other hand, if you connect it with a 230V power source, the duty cycle will be 30% at 150 amps. So, if you run it in 150 amp power output, it’ll work 3 minutes continuously. After that, it’ll need a rest of 7 minutes.

A continuous 3 minutes operation at 150 amp output is not bad at all. If you don’t think so, try once. You can perform tough welding tasks if you have a 150 amp welder with 3 minutes runtime.

Easy to Use

Hobart Handler 210 comes with a user guide which guides you to set up the welder properly. It is very easy to set up. If you do this for 2-3 times, you’ll learn how to set it up.

It is also easy to use welder. If you are a DIY enthusiast, this’ll be a great tool for you. It comes with a lot of user-friendly features which will make using this tool comfortable.  

You can use this tool for performing a wide range of tasks. For example- exhaust systems, auto body panel, mower decks, lawn and garden equipment, farm equipment, racks, metal construction, etc. are some of those.

The built-in spool gun control circuitry and the built-in contactor have made using the welder easier.


  • The scope of using 115V or 230V power source has made this welder versatile. It can be used both at home and job sites.
  • The power output up to 210 volts has proven that the welder is great until you try heavy tasks. You can depend on it for performing light and medium tasks.
  • The duty cycle of the welder allows you to get précised output comparing to most other welders of same budget range.


  • Comparing to other welders of this size, it comes with a bit overweight. But still, it is easily transferable.

So, this is all about Hobart Handler 210 MVP MIG Welder. You can give a try. If you wish to check some more welders, look below. I have also talked about some more welders that you may like.

Goplus MIG 130 Welder Flux Core Wire Automatic Feed Welding Machine w/ Free Mask
Goplus MIG 130 Welder Flux Core Wire Automatic Feed Welding Machine

If you are looking for a light household welder, you can check Goplus MIG 130 Welder. This welder is powered by 110V home source. It can provide up to 110 amp output. Duty cycle at 90 amp is 20%. These specifications say that this welder is great for household use.

This welder comes with a handful of features which will make welding easy. It’ll allow you to weld at 4 different speeds. For making home welding easy, it is only 35 lbs in weight. Though it is a small welder, it is also practical. So, you’ll get a good performance from this welder.

Get it from Amazon

MIG Welder, Wheeled, 200 (208)/230VAC
MIG Welder Wheeled 200 (208)230VAC

This MIG welder from Miller Electric is a great one. If you are searching for a more heavy-duty welder than Hobart handler 210 MVP, this can be a great choice for you. It can produce around 200 amp power. The duty cycle of this welder is almost 60%.

The duty cycle ensures that it is a heavy duty welder. It is also heavy in weight. But if you think of the power, the weight is considerable. It is a great welder for heavy tasks in job sites. So, if you are looking for a welder that can handle the heavy tasks of your job site, you can check this.

Get it from Amazon

2017 Everlast PowerMIG 200 200amp MIG stick welder dual voltage 110v/220v spool gun ready
2017 Everlast PowerMIG 200

This is another dual voltage welder like Hobart handler 210 MVP welder. It takes power from 110V or 220V power sources. It can produce up to 200 amps for précised welding jobs.

This compact and durable MIG welder can handle household tasks as well as normal job site tasks. It allows you to control the arc characteristics in both Stick and MIG modes. It comes with a weight of only 35 lbs. So, you can easily move this welder to different places.

Get it from Amazon

Comparison of the Alternatives

FeatureHobart handler 210 MVPGoplus MIG 130Miller Electric wheeled MIG welder2017 Everast PowerMIG 200
Ampere Produced Up to 210Up to 110Up to 200Up to 200
Duty Cycle30%20%60%
Price Range$$$$$$$$

The choice of the welder is fully yours. I have tried to cover all the sides of Hobart handler 210 MVP in this Hobart 210 MVP review. If you are searching for a welder for performing light and medium duty tasks, this welder will be a good choice.

We will be happy to hear your thoughts

      Leave a reply

      10 − 3 =